New Idea To Get TV Antenna Into All Rooms

liuh

All

I read some threads talking about linking the RJ45 cables across rooms through existing cable ducts. So I am thinking if we can pull those TV Antenna Cable through existing duct to provide TV singal to other room instead of digging the wall to lay our own? I have very bad experince to get constructure worker to deal with cabling. In my current flat I moved the antenna outlet and the signal dropped to such low level that I can't use it at all. I try not touch that this time.

So first question anyone get the connection diagram for all the ducts both RJ45 and also the one TV Antenna as well?

Thanks

liuh

qualcomm

Of coz if you add a cable signal drop is the bad point

If you need to have better signal 放大器 is needed the price is around $320.

Also the plate you needed should be POWERED one which is around $80 while the existing is around $30 ja.

kenykl

20mm conduit Cat5 + Coaxial maybe too tight la... but a good idea....:>

liuh

[quote:df1a59fa83="kenykl"]20mm conduit Cat5 + Coaxial maybe too tight la... but a good idea....:>[/quote]

I'm trying to source some very thin coaxial cable which is only 20% thicker than normal UTP Cat5. It should be good enough for indoor use.

I will lay the cable and check out the signal before investing in amplifier.

Also I found some faceplate with 4 output slot and you can plug in RJ or BNC or FT connector. Sounds very useful for me.

Again anyone have the diagram how those phone outlet connecting to each other? I would be very helpful for me to implement my plane.

Thanks

liuh

qualcomm

[quote:0312d07b59="kenykl"]20mm conduit Cat5 + Coaxial maybe too tight la... but a good idea....:>[/quote]

Yes so I choose people to work for me they used at least 2 days to finish the work.

liuh

[quote:385091cb76="qualcomm"][quote:385091cb76="kenykl"]20mm conduit Cat5 + Coaxial maybe too tight la... but a good idea....:>[/quote]

Yes so I choose people to work for me they used at least 2 days to finish the work.[/quote]

How much? I may consider to hire one if the price is reasonable.

Thanks

liuh

qualcomm

I just ask the people right there in my block ja the price is not cheap.

kenykl

Maybe I can ask my colleague to do part-time wor... Their job is perform wiring....:>

liuh

[quote:f54ff7dee0="qualcomm"]I just ask the people right there in my block ja the price is not cheap.[/quote]

In RC? You mean the residence or construction worker?
If you don't mind can you PM me their charge rate?

Thanks

liuh

qualcomm

I add sockets also around $250-300 per one la