BONCO匙膽

RamblerVillager

:em11:

[quote:095491451e="cliff"]1) Screw out the 2 x screws and the cover at the side of the main door
2) Screw a little inside the '-' screw which is protected with a 'C' circle in order to open the lock of the Key-Cylinder.
3) Insert the Old Bonco key (Half not 100% inserted) into the Key-Cylinder as a handler for screwing out.
[/quote]

liuh

[quote:cc08af8f56="cliff"]1) Screw out the 2 x screws and the cover at the side of the main door
2) Screw a little inside the '-' screw which is protected with a 'C' circle in order to open the lock of the Key-Cylinder.
3) Insert the Old Bonco key (Half not 100% inserted) into the Key-Cylinder as a handler for screwing out.

* Put your new Key-Cylinder and screw inside and reverse the procedure for the installation.

Good luck All.

** I have installed a new Key-Cylinder at Saturday. But my one is not Bonco one so other Key-Cylinder would be fine for RC too.[/quote]

Any special tool is needed? Or I can do it with cross/flat type of screw driver?  Also I gues no modification is need for the lock at all right?

Thanks

liuh

cliff

[quote:d82cd8a624="liuh"][quote:d82cd8a624="cliff"]1) Screw out the 2 x screws and the cover at the side of the main door
2) Screw a little inside the '-' screw which is protected with a 'C' circle in order to open the lock of the Key-Cylinder.
3) Insert the Old Bonco key (Half not 100% inserted) into the Key-Cylinder as a handler for screwing out.

* Put your new Key-Cylinder and screw inside and reverse the procedure for the installation.

Good luck All.

** I have installed a new Key-Cylinder at Saturday. But my one is not Bonco one so other Key-Cylinder would be fine for RC too.[/quote]

Any special tool is needed? Or I can do it with cross/flat type of screw driver?  Also I gues no modification is need for the lock at all right?

Thanks

liuh[/quote]

Not any special toos for the Key-Cylinder installation. You would like to prepare two screw drivers : '+' and '-'. My suggestion is that you need to pay more attention on the Step 2) for unlock the Key-Cylinder.

Besides I am living in T6 RC now. If you have any problem regarding this you can phone at 96509991. ( Most likely I will leave my office at 19:30 and arrive RC at 20:00 )