我今天係旺角買了BONCO匙膽($180). 老闆說BONCO的Quality OK和Easy to Install 所以我準備DIY 自己換鎖.
The boss also said all theft will broken your door direct no one will stupidly broken your 匙膽. So an expensive one is not very useful.作者: RamblerVillager 時間: 2004-5-23 18:06:05
more作者: abo and keung 時間: 2004-5-23 21:46:52
咁要唔要講咩尺寸咁架？作者: Wynne and Paul 時間: 2004-5-23 22:12:30
need to tell them the model number ??作者: Wynne and Paul 時間: 2004-5-23 22:13:21 標題: Re: Bonco匙膽
[quote:ae9dd08cf5="Rambler Villager"]我今天係旺角買了BONCO匙膽($180). 老闆說BONCO的Quality OK和Easy to Install 所以我準備DIY 自己換鎖.
The boss also said all theft will broken your door direct no one will stupidly broken your 匙膽. So an expensive one is not very useful.[/quote]
see some rust in your 匙膽. Is it dirt or really rust ??作者: RamblerVillager 時間: 2004-5-23 23:56:58 標題: Re: Bonco匙膽
髒物
[quote:a3ad932056="Wynne & Paul"][quote:a3ad932056="Rambler Villager"]我今天係旺角買了BONCO匙膽($180). 老闆說BONCO的Quality OK和Easy to Install 所以我準備DIY 自己換鎖.
The boss also said all theft will broken your door direct no one will stupidly broken your 匙膽. So an expensive one is not very useful.[/quote]
see some rust in your 匙膽. Is it dirt or really rust ??[/quote]作者: leebrian 時間: 2004-5-23 23:57:59
Rambler Villager:
Have you installed the key-set? I want to learn to install the key-set. Can you teach us?作者: RamblerVillager 時間: 2004-5-23 23:59:28
講藍澄灣以經OK.
There are only two models for Front Door. Long and Short. RC used the long one.
裝修師傳 will install it for me but I will photo the procedure.
[quote:0a43a0399a="leebrian"]Rambler Villager:
Have you installed the key-set? I want to learn to install the key-set. Can you teach us?[/quote]作者: cliff 時間: 2004-5-24 11:05:21
1) Screw out the 2 x screws and the cover at the side of the main door
2) Screw a little inside the '-' screw which is protected with a 'C' circle in order to open the lock of the Key-Cylinder.
3) Insert the Old Bonco key (Half not 100% inserted) into the Key-Cylinder as a handler for screwing out.
* Put your new Key-Cylinder and screw inside and reverse the procedure for the installation.
Good luck All.
** I have installed a new Key-Cylinder at Saturday. But my one is not Bonco one so other Key-Cylinder would be fine for RC too.作者: RamblerVillager 時間: 2004-5-24 11:19:59
:em11:
[quote:095491451e="cliff"]1) Screw out the 2 x screws and the cover at the side of the main door
2) Screw a little inside the '-' screw which is protected with a 'C' circle in order to open the lock of the Key-Cylinder.
3) Insert the Old Bonco key (Half not 100% inserted) into the Key-Cylinder as a handler for screwing out.
[/quote]作者: liuh 時間: 2004-5-24 11:38:14
[quote:cc08af8f56="cliff"]1) Screw out the 2 x screws and the cover at the side of the main door
2) Screw a little inside the '-' screw which is protected with a 'C' circle in order to open the lock of the Key-Cylinder.
3) Insert the Old Bonco key (Half not 100% inserted) into the Key-Cylinder as a handler for screwing out.
* Put your new Key-Cylinder and screw inside and reverse the procedure for the installation.
Good luck All.
** I have installed a new Key-Cylinder at Saturday. But my one is not Bonco one so other Key-Cylinder would be fine for RC too.[/quote]
Any special tool is needed? Or I can do it with cross/flat type of screw driver? Also I gues no modification is need for the lock at all right?
Thanks
liuh作者: cliff 時間: 2004-5-24 12:15:46
[quote:d82cd8a624="liuh"][quote:d82cd8a624="cliff"]1) Screw out the 2 x screws and the cover at the side of the main door
2) Screw a little inside the '-' screw which is protected with a 'C' circle in order to open the lock of the Key-Cylinder.
3) Insert the Old Bonco key (Half not 100% inserted) into the Key-Cylinder as a handler for screwing out.
* Put your new Key-Cylinder and screw inside and reverse the procedure for the installation.
Good luck All.
** I have installed a new Key-Cylinder at Saturday. But my one is not Bonco one so other Key-Cylinder would be fine for RC too.[/quote]
Any special tool is needed? Or I can do it with cross/flat type of screw driver? Also I gues no modification is need for the lock at all right?
Thanks
liuh[/quote]
Not any special toos for the Key-Cylinder installation. You would like to prepare two screw drivers : '+' and '-'. My suggestion is that you need to pay more attention on the Step 2) for unlock the Key-Cylinder.
Besides I am living in T6 RC now. If you have any problem regarding this you can phone at 96509991. ( Most likely I will leave my office at 19:30 and arrive RC at 20:00 )