藍澄灣業主社群

標題: 把抽油煙機溶膠邊換掉全新面貌大家look look^^ [打印本頁]

作者: tony and carmen 時間: 2004-10-2 22:12:09 標題: 把抽油煙機溶膠邊換掉全新面貌大家look look^^

8) 比d意見^^

作者: tony and carmen 時間: 2004-10-2 22:13:13

^^

作者: eric_818 時間: 2004-10-2 22:14:41

係咪好大工程?

作者: YY and KC 時間: 2004-10-2 23:31:30

係咪成個換呀? 要幾多錢呢?

作者: diedsee 時間: 2004-10-3 00:19:58

唔錯wor
但會唔會燙手ga???

作者: fkf 時間: 2004-10-3 00:24:14

it looks pretty nice how much does it cost for this?

作者: andy and phy 時間: 2004-10-3 02:06:06

睇唔到相喎可否post上網? thanks

作者: tony and carmen 時間: 2004-10-3 11:37:26

其實只需要將原有膠邊起走.換過鋼片用了1小時就ok :em11: ..
:arrow: 連人工包正面3條鋼$500
另開爐火 :evil: 時會有一些熱.但不盪手放心 8)

作者: tony and carmen 時間: 2004-10-3 14:41:49

[quote:bc67e309aa="andy&phy"]睇唔到相喎可否post上網? thanks[/quote]
張相m數大你要等多陣

作者: 豆腐人 時間: 2004-10-3 16:39:22

[quote:cb2bb446af="tony&carmen"]

其實只需要將原有膠邊起走.換過鋼片用了1小時就ok :em11: ..
:arrow: 連人工包正面3條鋼$500
另開爐火 :evil: 時會有一些熱.但不盪手放心 8)[/quote]

去邊度搵師傅做可否介紹一下!

作者: SEVEN 時間: 2004-10-3 19:39:43

[quote:b627c5d583="tony&carmen"]

其實只需要將原有膠邊起走.換過鋼片用了1小時就ok :em11: ..
:arrow: 連人工包正面3條鋼$500
另開爐火 :evil: 時會有一些熱.但不盪手放心 8)[/quote]

請提供師傅比我..我想整 :em09:

作者: tony and carmen 時間: 2004-10-3 20:20:03

豆腐人&seven已pm你們看看私人信箱

作者: N and M 時間: 2004-10-3 23:21:55

I've made similar change as yours. But haven;t removed the "plastic edge".

http://hk.pg.photos.yahoo.com/ph/nelsonwongkc/detail?.dir=a3ed&.dnm=3678.jpg

作者: AngusZire 時間: 2004-10-4 00:40:10

[quote:de62ab32cf="N&M"]I've made similar change as yours. But haven;t removed the "plastic edge".

http://hk.pg.photos.yahoo.com/ph/nelsonwongkc/detail?.dir=a3ed&.dnm=3678.jpg[/quote]

Please kindly advise how we can make it and where to buy the materials

thanks
AngusZire

作者: J and G 時間: 2004-10-4 00:58:16

[quote:3cf62371d8="N&M"]I've made similar change as yours. But haven;t removed the "plastic edge".

http://hk.pg.photos.yahoo.com/ph/nelsonwongkc/detail?.dir=a3ed&.dnm=3678.jpg[/quote]

we did the somethings material + labour charged $2000 :em03:

作者: J and G 時間: 2004-10-4 01:01:59

sorry i meant 正面3條鋼

作者: N and M 時間: 2004-10-4 01:03:42

[quote:81e87d75fa="J&G"][quote:81e87d75fa="N&M"]I've made similar change as yours. But haven;t removed the "plastic edge".

http://hk.pg.photos.yahoo.com/ph/nelsonwongkc/detail?.dir=a3ed&.dnm=3678.jpg[/quote]

we did the somethings material + labour charged $2000 :em03:[/quote]
My total is $1800 including the stainless screen at the oven and the "edge next to the refrigerator as shown in the photos

作者: N and M 時間: 2004-10-4 01:08:18

[quote:90005fad6a="AngusZire"][quote:90005fad6a="N&M"]I've made similar change as yours. But haven;t removed the "plastic edge".

http://hk.pg.photos.yahoo.com/ph/nelsonwongkc/detail?.dir=a3ed&.dnm=3678.jpg[/quote]

Please kindly advise how we can make it and where to buy the materials

thanks
AngusZire

[/quote]

It is done by my decoration contractor. Don't know where to buy and how to install it. You may ask your decoration worker.

作者: tony and carmen 時間: 2004-10-4 22:04:25

講開包鋼放多2張相大家look look廚房&廁所

作者: Robert 時間: 2004-10-4 22:11:18

又好睇，又實用 :em11:
請問廁所包鋼邊大約要幾$$，施工又要幾多日or幾多個鐘呢？

Thank you！

作者: tony and carmen 時間: 2004-10-4 22:16:00

^^

作者: tony and carmen 時間: 2004-10-4 22:25:23

我5月時已經裝好不記得這鋼料價錢多少..我要回去問一下明天覆你^^
大約半天時間裝好

作者: tony and carmen 時間: 2004-10-5 19:01:00

[quote:1b5e246324="R & M"]又好睇，又實用 :em11:
請問廁所包鋼邊大約要幾$$，施工又要幾多日or幾多個鐘呢？

Thank you！[/quote]

材料費3支鋼要$600人工$200一共$800

作者: Robert 時間: 2004-10-5 22:49:12

[quote:f5342301e5="tony&carmen"]材料費3支鋼要$600人工$200一共$800[/quote]

首先唔該晒你提供資料

但我又有另一個問題．．．．．就係o係邊度搵師傅？ :em14:

作者: tony and carmen 時間: 2004-10-6 00:32:56

[quote:e12a32f7ad="R & M"][quote:e12a32f7ad="tony&carmen"]材料費3支鋼要$600人工$200一共$800[/quote]

首先唔該晒你提供資料

但我又有另一個問題．．．．．就係o係邊度搵師傅？ :em14:[/quote]
我已pm給你

作者: AngusZire 時間: 2004-10-6 00:41:38

[quote:ae39c002ec="tony&carmen"][quote:ae39c002ec="R & M"][quote:ae39c002ec="tony&carmen"]材料費3支鋼要$600人工$200一共$800[/quote]

首先唔該晒你提供資料

但我又有另一個問題．．．．．就係o係邊度搵師傅？ :em14:[/quote]
我已pm給你[/quote]

Please send to me too.

thanks in advance
AngusZire

作者: tony and carmen 時間: 2004-10-6 00:58:14

[quote:af07bad9e7="AngusZire"][quote:af07bad9e7="tony&carmen"][quote:af07bad9e7="R & M"][quote:af07bad9e7="tony&carmen"]材料費3支鋼要$600人工$200一共$800[/quote]

首先唔該晒你提供資料

但我又有另一個問題．．．．．就係o係邊度搵師傅？ :em14:[/quote]
我已pm給你[/quote]

Please send to me too.

thanks in advance
AngusZire

[/quote]
我已pm給你

作者: AngusZire 時間: 2004-10-6 01:07:37

[quote:ee2ac9e0f0="tony&carmen"][quote:ee2ac9e0f0="AngusZire"][quote:ee2ac9e0f0="tony&carmen"][quote:ee2ac9e0f0="R & M"][quote:ee2ac9e0f0="tony&carmen"]材料費3支鋼要$600人工$200一共$800[/quote]

首先唔該晒你提供資料

但我又有另一個問題．．．．．就係o係邊度搵師傅？ :em14:[/quote]
我已pm給你[/quote]

Please send to me too.

thanks in advance
AngusZire

[/quote]
我已pm給你[/quote]

Thank you!!

Ah is that the price $800 for the whole installation at your house?

Anguszire

作者: Robert 時間: 2004-10-6 01:12:44

[quote:90a945bfd6="tony&carmen"][quote:90a945bfd6="R & M"][quote:90a945bfd6="tony&carmen"]材料費3支鋼要$600人工$200一共$800[/quote]

首先唔該晒你提供資料

但我又有另一個問題．．．．．就係o係邊度搵師傅？ :em14:[/quote]
我已pm給你[/quote]

thanks a lot!

作者: P女 時間: 2004-10-6 08:57:04

$2000???
expensive wor

作者: Robert 時間: 2004-10-6 13:16:57

P女︰

就算係貴D都無計，因怕條木日後濕得水多會霉霉爛爛，到時就唔好睇 :em18:
而且我見 tony&carmen 佢地都做得幾靚仔o下 ~.~

作者: tony and carmen 時間: 2004-10-6 19:06:42

[quote:7b5403ee82="

女"]$2000???
expensive wor[/quote]
^^我想要報清楚一點^^
廁所門框:3條鋼料+人工$800
廚房油煙機:3條鋼料+人工$500

作者: andy and phy 時間: 2004-10-17 04:12:11

[quote:1b7ed3f642="tony&carmen"]

其實只需要將原有膠邊起走.換過鋼片用了1小時就ok :em11: ..
:arrow: 連人工包正面3條鋼$500
另開爐火 :evil: 時會有一些熱.但不盪手放心 8)[/quote]

去邊度搵師傅做可否介紹一下 pm me

作者: tony and carmen 時間: 2004-10-17 09:46:57

andy&phy 我pm不到你.留e-mail比你:to1124ny@yahoo.com.hk

作者: andy and phy 時間: 2004-10-18 11:00:19

[quote:d38ceaed8d="tony&carmen"]andy&phy 我pm不到你.留e-mail比你:to1124ny@yahoo.com.hk[/quote]

hi tony&carmen

i received your pm la

thanks!

andy&phy

歡迎光臨藍澄灣業主社群 (http://rcrest.bzone.com.hk/Discuz/)